NEMA IEC PET Body Phantom (NU 2-2018)™ - PET/NEMA-IEC-BODY/P

Main Features

The NEMA IEC PET Body Phantom Set™ consists of a body phantom, a lung insert, and an insert with six spheres with various sizes
It is designed in accordance with the recommendations by the International Electrotechnical Commission (IEC) and modified by the National Electrical manufacturers Association (NEMA)
It is recommended for use in the evaluation of reconstructed image quality in whole body PET imaging
Spheres are fillable from outside the closed cylinder

Main Applications

Simulation of whole-body imaging especially using PET and camera-based coincidence imaging techniques
Evaluation of reconstructed image quality in whole-body PET and camera-based coincidence imaging
Determination of the coincidence count rate characteristics in brain and cardiac imaging
Evaluation of the relationship between true coincidence count rate and radioactivity
Determination of the address errors caused by address pile up
Evaluation of the count loss correction scheme
Research

Specifications of Main Cylinder

All clear material: PMMA
Exterior length: ~ 217 mm
Interior length: ~ 193 mm
Interior anteroposterior: ~ 221 mm
Interior lateral: ~ 290 mm
Wall thickness: ~ 3.2 mm
Volume of empty cylinder: ~ 9.7 l

Specifications of Insert and Spheres

All clear material: PMMA
Fillable Insert outside height: ~ 203 mm
Fillable Insert inside height: ~ 185 mm
Fillable Insert outside diameter: ~ 51 mm
Fillable Insert Inside diameter: ~ 45 mm
Volume of Fillable Insert: ~ .26 liters

*International Standard: Radionuclide imaging devices – Characteristics and test conditions – Part 1: Positron emission tomographs, International Electrotechnical Commission (IEC), 61675-1, Geneva, Switzerland, 1998.

**Performance Measurements of Positron Emission Tomographs (PETS), NEMA Standards Publication NU 2-2018, National Electrical Manufacturers Association (NEMA), Washington, D.C.

Shipping

Carton: 13" x 13" x 13"
Weight: 9lbs.

Externally Fillable Hollow Spheres

Specifications

Model No: Inner Diameter
EHS-100: 10 mm
EHS-130: 13 mm
EHS-170: 17 mm
EHS-220: 22 mm
EHS-280: 28 mm*
EHS-370: 37 mm

Distance from sphere center to mounting surface: 70 mm ± 1 mm

Shipping

Carton: 7" x 3" x 3"
Weight: 1lbs.

*Purchase an extra 28 mm Sphere to make your PET/NEMA-IEC-BODY/P compliant with NEMA Standard NU 1-2018.

Available in Convenient Sets

Specifications

Model No: Spheres included
EHS-SET6-A: 10 mm, 13 mm, 17 mm, 22 mm, 28 mm, 37 mm (For NEMA NU 2 PET Standard)
EHS-SET6-B: 10 mm, 13 mm, 17 mm, (2) ea of 28 mm, 37 mm (For NEMA NU 1-2018 Gamma Camera Standard)